New Cadillac CTS-V Coupe Racer Hits the Tarmac for the First Time

Cadillac is getting ready to return to the fabulous world of motorsports with its new CTS-V Coupe race car. Following the two-door model's world premiere at the Detroit Motor Show last week, the race-prepped CTS-V Coupe hit the track for the first time on Monday driven by Johnny O’Connell and Andy Pilgrim, for tests at Sebring International Raceway.

GM's luxury car division had pulled out of racing before the U.S. government bailed out the company in 2009. More specifically, the last time Cadillac competed was in 2007 in the Sports Car Club of America World Challenge GT series. Now, the company will reenter the series, beginning with the season-opening race in St. Petersburg, Florida on March 25-27. Hit the jump for a comprehensive gallery.

2014 Cadillac ATS and ATS-V Spec Sheet Makes the Internet Rounds, but is it Real?

A supposedly official preliminary spec sheet of Cadillac's forthcoming new small luxury sedan surfaced on the internet today. We're not going to call it a leak just yet as we're not at all certain for its authenticity. That said, we'd advise you not to take anything you read on the paper after the jump for granted.

Labeled as the 2014 Cadillac ATS, the spec sheet says the Detroit firm's BMW 3-Series rival will be offered with three engine options including a 270HP 2.0-liter turbocharged four-banger and a 330HP 3.6-liter V6 for the standard versions, and a 470HP 6.2-liter V8 for the M3-challenging ATS-V. The four-and six-cylinder models are said to be hooked up to an 8-speed automatic transmission, while the flagship V8 comes with a 6-speed auto.

While we can't vouch for the numbers and data shown on the spec sheet, we can tell you that the ATS, or whatever else GM decides to name its new entry-level sedan, is expected to hit the market within the next two years.

Via: Cheers and Gears & Atsforums

Lingenfelter Raises the Bar with 700HP+ Tuning Package for Cadillac CTS-V Models

If there's one company that knows a thing or two about tuning GM's products, it's Lingenfelter. The Indiana-based tuning firm has just announced its latest package for the Cadillac CTS-V series, which covers the sedan, station wagon and coupe models. In stock form, the CTS-V's 6.2-liter supercharged V8 churns out 556HP and 551 lb.-ft of torque.

Lingenfelter's engine tune includes a variety of mods such as ported LSA cylinder heads and the addition of LPE's GT9 ZR1 supercharger camshaft, which help push the V8's output to more than 700-horses at the crankshaft. The long-time GM tuner also tried out a CTS-V Coupe with a manual transmission on the dyno, with the test yielding 623HP and 617 lf-ft at the rear wheels. Follow the jumps for a video and detailed info on the tuning package.

Lingenfelter Cadillac CTS-V Turnkey Package:

- Engine removal and removal of supercharger assembly, cylinder heads and camshaft
- Lingenfelter CNC porting & polishing of LSA cylinder heads for optimal flow
- 2.165" diameter hollow stem intake valves
- 1.59" diameter high temperature inconnel exhaust valves
- Lingenfelter multi-angle valve job, cc chambers, surfacing and spring height adjustment
- Competition Cams valve springs, titanium retainers, 10 degree locks
- Lingenfelter GT9 camshaft
- GM Head gaskets & head bolts
- 2.55" diameter steel supercharger drive pulley - powder coated black - 8 rib
- 8 rib serpentine belt
- Lingenfelter LS9 solid supercharger isolator coupling
- Port and polish supercharger front cover
- Lingenfelter air intake duct
- K & N Air Filter
- Lingenfelter 10% overdrive harmonic balancer
- 63 lbs/hour fuel injectors
- Fuel injector connector change
- 160 degree thermostat
- Professional installation
- Engine testing and expert ECM tuning
- Chassis dyno testing before and after installation
- Excellent drivability, highway mileage not adversely affected
- Lingenfelter certificate of authenticity
- Lingenfelter 2 year/24,000 mile warranty

GM Recalling More than 26,000 Cadillac, Chevrolet and GMC SUVs and Trucks

General Motors is expanding a previous recall concerning a faulty rear-axle cross pin to include another 26,751 SUVs and trucks from the 2011 model year. The first recall was issued in late December and concerned approximately 1,260 Cadillac Escalades, Chevrolet Avalanche and Silverado 1500s, and GMC Sierra 1500s, all from the 2011MY.

The updated recall now covers certain 2011MY Cadillac Escalade, Escalade ESV, Escalade EXT; Chevrolet Avalanche, Colorado, Silverado, Suburban, Tahoe; and GMC Canyon, Sierra, Yukon and Yukon XL vehicles.

The Detroit automaker said the rear axle cross pins were not properly heat treated and could fracture and become displaced within the rear axle.

"Should the pin shift out of position, it could create an interference condition and cause the rear axle to lock. The driver may not be able to maintain directional control of the vehicle and a crash could occur without warning," said GM in a statement on NHTSA's website.

As expected, GM's dealers will install a new rear axle cross pin free of charge, with the safety recall to begin before the end of the month

2010 Cadillac Sports Design Cars Concept SRV

This is the concept of next Cadillac. This concept is an idea from its Wayne Cherry who is responsible in making design concept. After a distinguished career at General Motors that culminated in his being appointed only the fifth vice president of design in the company’s history, he decided to build a concept car of his own.

2010 Cadillac Sports Cars SRV Concept

Wayne Cherry has always loved concept cars. Then you take a close look at Cherry’s VSR street rod, at the hardware, the workmanship, and, most of all, the design, and you realize it could easily take center stage as a concept car on the GM stand at the next international auto show.

"You just can't stop designing, you just can't stop being involved with cars," Cherry explains. "You start to do something like this, and it turns into a concept vehicle." He makes it sound like a winter garage project that got a little out of control, which at a basic level perhaps isn't a million miles from the truth.

Then you take a close look at Cherry's VSR street rod, at the hardware, the workmanship, and, most of all, the design, and you realize it could easily take center stage as a concept car on the GM stand at the next international auto show.

He joined GM in 1962, straight out of California’s Art Center design school, and was assigned to the advanced design studio at the Tech Center, where, among his first assignments, he assisted on a project that became the first Oldsmobile Toronado, one of the high watermarks of Bill Mitchell’s stint as GM design chief.

At Vauxhall, he worked on the gullwing XVR, the brand's first-ever concept car, which was unveiled at the 1966 Geneva show. His wild, mid-engine SRV, shown at the 1970 Earls Court Motor Show in London, was a four-door, four-seater that stood just 41 inches tall.

The Equus, one of the star concepts of 1978, was a crisp, state-of-the-moment roadster that rivaled the best from Bertone and Pininfarina. "That's the most uncompromised design I've ever worked on," Cherry said at the time.